Kinetic Horizontal Sliding Façade Shading System

 - 10500
Kinetic Facade, Horizontal Sliding Shading System

Horizontal Sliding shading is a kinetic facade made up of single or multiple sashes sliding on aluminum tracks. The sliding motion can take place on the top or on the bottom. Usually, a side frame is not required unless there is the need for locking. Locking can be provided manually or electrically. The sashes can be arranged next to each other on the same track or in a stepped formation hooking to each other. The movement is in the horizontal axis manually or electrically. The max sash width is limited to 2 meters and its height can go up to 5 meters. In its standard installation configuration, it is mounted within the building frame. Optionally it can also be fixed on the outside thus creating seamless integration with the building cladding. In its typical configurations the system can accommodate cladding options like natural wood, GRP, Glass, Fiber Cement, Ceramic, Perforated Metal Sheets, Aluminum blades and ACP. The system can be installed directly on the building opening without the need for any special provisions. The only necessary consideration is the wiring arrangement.

This electric Sliding shading system can be centrally controlled by the Building Management System or individually via a wall mounted switch / remote control in single or group mode.

Technical characteristics
Max Sash Width 4000mm
Max Sash Height 5000mm
Max Sash Weight 400 Kg
Installation Depth 60 - 230 mm
Parking Space per Sash 300 - 4000 mm
Cladding Finishes Louver, Glass, sheet metal, Aluminium Composite Panel, HPL, Fiber Cement, Wood, ceramic
Cladding Space 4 - 10mm
Sash profile width 60mm
Sash Profile Height 28mm
Frame Profile Width 60mm
Frame Profile Height 44mm
Electric Motion Available
Electric Locking System Available
Manual Motion Available
Manual Locking System Available
Sliding Rollers Stainless Steel
Alignment Rollers Stainless Steel
Blackout Available
Flyscreen Available
Sealing Gaskets, Nylon Brush